Zone Ii Remote Control Functions - Harman Kardon AVR 7000 Owner's Manual

Zone II Remote Control Functions

å
∫
ç
∂
≠
ƒ
©
˙
I
å Power Off
∫ AVR Selector
ç Input Selectors
∂ Transport Controls
≠ Tuning Up/Down – Fast Play
ƒ Preset Up/Down – Track Skip
© Disk Skip
˙ Volume Up/Down
Mute
I
14 ZONE II REMOTE CONTROL FUNCTIONS
å Power Off: When used in the room
where the AVR 7000 is located, press this but-
ton to place the unit in Standby. When it is
used in a remote room with a sensor that is
connected to the Multi IR jack b, this button
turns the Multi-Room system on and off.
∫ AVR Selector: Press this button to turn
on the AVR. The input in use when the unit was
last on will be selected.
ç Input Selectors: When the AVR is off,
press one of these buttons to select a specific
input and turn the unit on. When the unit is
already in use, pressing one of these buttons
will change the input.
∂ Transport Controls: These buttons
control the Play, Pause and Stop functions
of compatible Harman Kardon CD, DVD and
cassette players.
≠ Tuning Up/Down – Fast Play: When
the AVR's tuner is selected as the input source,
these buttons will tune up or down through the
frequencies of the chosen band. When a CD,
DVD or cassette deck is selected, these buttons
activate the Fast Play Forward or Fast Play
Reverse functions.
NOTE: The Zone II remote may be used in
either the same room where the AVR 7000 is
located, or it may be used in a separate room
with an optional infrared sensor that is con-
nected to the AVR 7000's Multi IR input jack
b. When it is used in the same room as the
AVR, it will control the functions of the AVR or
any compatible Harman Kardon products in
that room. When it is used in a separate room
ƒ Preset Up/Down – Track Skip: When
the AVR's tuner is selected as the input source,
these buttons will move up or down through
the list of stations that have been stored in the
preset memory. When a CD or DVD player is
selected, these buttons activate the forward or
reverse track or chapter skip functions.
© Disc Skip: When a compatible Harman
Kardon CD or DVD changer has been selected,
these buttons activate the Disc Skip function.
˙ Volume Up/Down: When used in the
room where the AVR 7000 is located, press this
button to raise or lower the volume in that
room. When it is used in a remote room with a
sensor that is connected to the Multi IR Jack
b, this button will raise or lower the volume in
the remote room.
I Mute: When used in the room where the
AVR 7000 is located, press this button to tem-
porarily silence the unit. When it is used in a
remote room with a sensor that is connected to
the Multi IR Jack b, this button will tem-
porarily silence the feed to the remote room
only. Press the button again to return to the
previous volume level.
via a sensor connected to the Multi IR Jack b,
the buttons for power, input source, volume,
mute and the tuner will control the source and
volume for the second zone, as connected to
the Multi Out Jacks d. (See page 33 for
complete information on using the Multi-Room
system.)