American Standard Colony RIght Height Elongated 10: Rough-In Toilet 2359.010 Specification Sheet

COLONY™ RIGHT HEIGHT™ ELONGATED
10" ROUGH-IN TOILET
❑ 2359.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• 10" roughing-in
• Elongated siphon action jetted bowl
• Fully glazed 2" trapway
• American Standard Aquameter™ Water Control
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❑
3370.016 Bowl
❑
4310.016 Tank
Nominal Dimensions:
705 x 508 x 781mm
(27-3/4" x 20" x 30-3/4")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color: ❏ White
❏ Seat: American Standard #5324.019 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #5311.012 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
COLONY™ RIGHT HEIGHT™
ELONGATED 10" ROUGH-IN TOILET
FINISHED WALL
19mm ± 6mm
(3/4 ± 1/4)
184mm
(7-1/4)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
178mm
311mm
(7)
(12-1/4)
254mm
C/L OF OUTLET
(10)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
K91
VITREOUS CHINA
705mm
(27-3/4)
SUPPLY
AS
REQ'D
419mm
(16-1/2)
*
203mm
(8)
152mm
(6)
FINISHED
FLOOR
508mm
(20)
C/L
781mm
(30-3/4)
375mm
(14-3/4)
235mm
(9-1/4)
Revised 2/08