Table of Contents
Advertisement
Picture menu
Target Inputs
Picture Mode
Reset
Backlight
Contrast
Brightness
Colour
Hue
28
GB
For the input currently being viewed, select whether to use the common setting or to
set each item separately.
"Common": Applies common settings whose adjustments are shared with other
inputs in which "Target Inputs" is set to "Common".
Current input name (e.g. AV1): Allows you to set each option separately for the
current input.
z
Set each input to "Common" if you require the same settings to apply to each input.
Selects the picture mode. The options for "Picture Mode" may differ depending on
the "Video/Photo" setting (page 34).
"Vivid": For enhanced picture contrast and sharpness.
"Standard": For standard picture. Recommended for home entertainment.
"Cinema": For viewing film-based content. Most suitable for viewing in a theatre-
like environment.
"Photo": Sets the optimum picture quality for photographs.
"Custom": Allows you to store your preferred settings.
Resets all the "Picture" settings except "Target Inputs", "Picture Mode" and
"Advanced Settings" to the factory settings.
Adjusts the brightness of the backlight.
Increases or decreases picture contrast.
Brightens or darkens the picture.
Increases or decreases colour intensity.
Increases or decreases the green tones and red tones.
~
"Hue" can only be adjusted for an NTSC colour signal (e.g. U.S.A. video tapes).
You can select the options listed below on the
"Picture" menu. To select options in "Settings", refer
to "Navigating through menus" (page 27).
Advertisement
Table of Contents
