Selecting A Component - Sony RM-LP204 Operating Instructions Manual

Selecting a Component

Basic procedure for selecting a component
Do the procedure below to select a component from the
function list. Note that the components contained in the
list will vary depending on the receiver.
1
Press FUNCTION.
The function list appears. The items in the list
correspond with the jacks on the receiver.
C D
TUNER
PHONO
2
Move the easy scroll key to select a component
from the list, then press the key to enter the
selection.
Information about the component appears in the
display window.
A display example
< C D >
CD
Sony
z
You can modify the category indication
The category indication tells you what component is actually
connected to the jacks on the receiver. If a component is
connected to jacks for which they are not originally meant, you
can modify the category indication to match the component. For
details, see "Programming the Remote" on page 16.
z
You can turn on components automatically
You can set the remote to automatically turn on a component
when it is selected from the function list. For details, see "Using
the auto power function" on page 19.
z
When selecting the MD/TAPE function on the receiver using
RM-LP204M
You can select either the TAPE or the MD function on the remote.
We recommend programming the category of the component
connected to the MD/TAPE jacks on the receiver to both the
TAPE and the MD function on the remote.
Depending on the component that you selected, you may
have to do an additional procedure, or you may be able to
obtain detailed information about the component by
doing an additional procedure. For details, see
"Additional procedures after selecting a component" on
this page.
14
Selected component
Category
Maker of the component
Additional procedures after selecting a
component
If you have selected tuner
Do the procedure below after you have selected the tuner.
1
Move the easy scroll key.
The preset station number list appears.
2
Move the easy scroll key to select the preset
station, then press the key to enter the selection.