Macros - One for All 5 User Manual & Code Book

Macros

You can program your ONE FOR ALL 5 to issue a sequence of
commands at the press of one button. For example, you may
want to turn off your TV, VCR and Satellite at the same time.
Any sequence of commands you regularly use can be reduced
to one key stroke for your convenience. A Macro should only
be set on the Custom keys.
To set up the Macro mentioned above on the key labeled A
on your ONE FOR ALL 5:
1
2
3
A
4
TV
VCR
SAT
5
6
A
• To install any macro, press:
MAGIC* + 9 9 5 + Key to which Macro will be
assigned + Sequence of commands + MAGIC*
• To erase any Macro from a key, press:
MAGIC* + 9 9 5 + Key to be cleared + MAGIC*
*Here you must hold down MAGIC until the device key blinks
twice.
Note: Each MACRO can consist of a maximum of 15 key strokes.
WWW.ONEFORALL.COM
Advanced Features
Press and hold down the MAGIC key
until a device key blinks twice (the
device key will blink once then twice).
Press 9 9 5.
Then press the A key to which the
Macro will be assigned.
Next press TV, POWER, VCR, POWER,
SAT, POWER
To store the Macro, press and hold
MAGIC until the device key blinks twice
(the device key will blink once then
twice).
Whenever you press the A key, the ONE
FOR ALL 5 will turn off your TV, VCR and
Satellite.
31