EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain saw
Husqvarna 385XP/XPG and 390XP/XPG from 2006's serial numbers and onwards (the year is clearly stated in plain text on the
type plate with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:1997, ISO 11681-1:2004.
Notiﬁed body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certiﬁcates for EC type examination
in accordance with annex VI, have the numbers: 404/00/767 - 385XP/XPG, 404/06/1119 - 390XP/XPG.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certiﬁed conformity with annex
V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The certiﬁcates have
the numbers: 01/161/018 - 385XP/XPG, 01/161/058 - 390XP/XPG.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 28 April 2006
Bo Andréasson, Development manager