Snow Blower Operation - Honda HS624 Owner's Manual

SNOWBLOWER OPERATION
Before operating this equipment you should read and understand the
SAFETY INFORMATION on page 3,4,5 and 6.
1. Start the engine according to the procedures described in page 22 .
2. Move the throttle lever to the FAST position for normal operation.
3.Release the auger clutch lever, and move the shift lever to select the
desired drive speed.
REVERSE "N" (Neutral)
' LEVER
NOTE:
Low speed is recommended for removing deep or hard-packed snow.
4. Set the foot pedal to "HIGH" position. (See page 15. Track type only).
5.Adjust the throwing direction by using the chute crank and the chute
guide. (See pages 10 and 12).
27