Removal From Storage; Transporting - Honda GX620 Owner's Manual

HELPFUL TIPS & SUGGESTIONS
Position the equipment so the engine is level. Tilting can cause oil
leakage.
With the engine and exhaust system cool, cover the engine to keep out
dust. A hot engine and exhaust system can ignite or melt some
materials. Do not use sheet plastic as a dust cover. A nonporous cover
will trap moisture around the engine, promoting rust and corrosion.
If installed, remove the battery and store it in a cool, dry place.
Recharge the battery once a month while the engine is in storage. This
will help to extend the service life of the battery.

Removal From Storage

Check your engine as described in the BEFORE OPERATION chapter of
this manual (see page 10 ).
If the cylinders were coated with oil during storage preparation, the
engine may smoke briefly at startup. This is normal.

TRANSPORTING

If the engine has been running, allow it to cool for at least 15 minutes
before loading the engine-powered equipment on the transport
vehicle. A hot engine and exhaust system can burn you and can ignite
some materials.
Before you can transport or store the engine, the LPG or NATURAL
GAS supply line must be disconnected. A qualified LPG or NATURAL
GAS technician must do this. Consult a local LPG or NATURAL GAS
supplier or your servicing dealer.
31