Recording From Other Equipment; Recording From Other Equipment - Sharp DV-NC70H Operation Manual

Recording From Other Equipment

Recording from Other Equipment

You can record video and audio signals from various external
sources, such as a camcorder, onto a video tape using this Unit.
For example, recording from a camcorder connected to LINE 2 IN/
DECODER on the Unit:
1
Connect your signal source (e.g.
Camcorder, Digital Camera etc.) to the
desired scart socket on the back of the
Unit using the manufacturers'
recommended cable (not supplied).
2
Ensure that the tape on which you wish to
record is inserted into the Unit.
3
Press the INPUT SELECT button on the
remote control until the VCR display
shows L2.
4
Press the RECORD button on the remote
to start recording.
OTHER POSSIBLE CONNECTIONS
• If you wish to record from a source connected to
LINE 1 IN/OUT, select L1. Press the RECORD
button on the remote to start recording.
• If you wish to record from a source connected with
audio phone leads to the sockets on the front of the
Unit, select L3. Press the RECORD button on the
remote to start recording.
• There are many different ways of connecting external equipment to the Unit. Please refer to your equipment operation
manuals for further information.
70
DVNC70H063_070.pm6
LINE 1 (TV)
L
R
DVD/VCR Unit back panel
www.sharp.co.uk/support
70
OPERATE
S-VIDEO
RGB VIDEO
LINE 2
RETURN
OUTPUT
SELECTOR
S-VIDEO
LINE 1 (TV)
LINE IN 3 VIDEO
29/8/02, 3:11 pm
TIMER
VIDEO Plus+ EJECT
ON/OFF
ON VCR/DVD VCR MENU
DISPLAY
SCREEN SELECTOR DVD SETUP
FUNCTION PROG/ OPEN/
ANGLE
REPEAT
CONTROL CLOSE
TITLE
DVD MENU
CLEAR
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
AM/PM INPUT SELECT VCR DVD
/
REV FWD
PLAY
REC
PAUSE/STILL
STOP
TAPE DPSS
SKIP SLOW
SPEED
AUDIO
CH
OUTPUT
VCR DVD
VCR/DVD COMBINATION
RRMCGA054WJSA
L - AUDIO - R