Timer; Setting Procedure - Siemens HK 280 Series Operating Instructions Manual

Timer

Setting procedure

1.
Press the a timer button.
When the time has elapsed
Correction
Cancel
Note
You can set the timer at any time. You can even set it
when a cooking time or end time has already been
set.
The time set always counts down visibly in the display.
The timer also features a special acoustic signal. This
enables you to tell whether it is the timer or a cooking
time which has run down.
2.
Use the + or buttons to set the timer as
required.
The setting is stored automatically after a few
seconds. The time set begins to count down in the
clock display.
A signal sounds when the time has elapsed. The timer
symbol flashes.
Press the a timer button.
Press the a timer button. Change the time by
pressing + or .
Press the a timer button twice in quick succession.
q You can set the hours, minutes and seconds.
31