Setting The Handset; Quick Access To Functions; Changing The Display Language - Siemens Gigaset C47H User Manual

Setting the handset

Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer tone) on the
handset will remain activated until you
press the display key
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with .
§Save§
Setting the handset
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.

Quick access to functions

The display keys have preset functions.
You can change the function assigned.
To start the function, you then simply
need to press the button.
Changing a display key assignment
¤
Press and hold the left or right display
key.
The list of possible key assignments is
opened. The following can be selected:
INT
Internal calls (see page 12).
SMS
Assign key with the menu for SMS func-
tions (depending on base station).
16
on the handset.
§OFF§
SMS Service
Assign key with the menu for ordering
info services (depending on base sta-
tion).
SMS Notific.
Assign key with the menu for activating
SMS notification (depending on base
station).
Withhold No.
Withhold phone number identification
for next call.
If a function or number has already been
assigned to the left display key, the
selected function (or its abbreviation) will
be displayed in the lowest display line
above the display key.
Starting a function
With the handset in idle status, press the
display key briefly.
The function menu is opened.

Changing the display language

You can view the display texts in different
languages.
¢ ¢
v Ð
Handset
The current language is indicated by
s
Select a language and press
.
§OK§
a
Press and hold (idle status).
If you accidentally choose a language you
do not understand:
v 5 4
Press keys in sequence.
s
Select the correct language
and press
¢
Language
‰
.
.
§OK§