Siemens Gigaset E150 Instructions Manual page 12

Special features of the Gigaset E 150
If the emergency call is answered, the other party will first hear
the message "This is an emergency call". After this message, your
name is announced provided you have programmed the emer-
gency key accordingly (see page 30). This is followed by the mes-
sage "Please press 5 to accept the emergency call". If the other
party presses 5 you can now speak to each other.
If the other party does not answer the call, e.g. because his
answering machine is on or he is not at home, then the emer-
gency procedure will automatically dial the next emergency
number. The emergency procedure will automatically switch to
the next emergency number after 60 seconds in the following
cases:
– the call is not answered
– the answering machine of the dialled emergency number is
on
– the emergency number is busy
If all 4 emergency numbers are dialled and no call is answered,
the emergency procedure is terminated with an error tone.
The emergency call recipients must have their telephone set for
tone dialling or pressing the 5 key to accept the call will not be rec-
ognised.
◆
i
◆
◆
10
All emergency keys flash on all registered handsets
and on the base throughout the emergency proce-
dure. The message "The emergency call is being
sent" is output on all loudspeakers.
The emergency call can also be answered by an
internal party if an internal call is programmed.
You should test run the emergency procedure to
ensure that the emergency mode is correctly pro-
grammed. Do not use the police, ambulance or fire
brigade for a test run.
Å
Å