Front Suspension; Suspension Adjustment; Suspension Setting - Triumph DAYTONA 650 Manual

Table of Contents

Advertisement

FRONT SUSPENSION

Front Fork Inspection
Examine each fork stanchion for any
sign of damage, scratching of the
slider surface, or for oil leaks.
If any damage or leakage is found
consult
an
dealer.
To check that the forks operate smoothly:
Position the motorcycle on level
ground.
While holding the handlebars and
applying the front brake, pump the
forks up and down several times.
NOTE:
The suspension movement will be
affected by different adjustment
settings.
If
roughness
stiffness is detected, consult your
authorised Triumph dealer.
WARNING:
motorcycle with defective or
damaged suspension can damage the
motorcycle, cause loss of control, or
an accident.
!!
!
Maintenance and Adjustment
authorised
Triumph
or
excessive
Riding
the
Page 65

SUSPENSION SETTING

The standard suspension settings provide a
comfortable
ride
characteristics for general, solo riding. The
chart
on the following page shows
suggested settings for front and rear
suspension.
WARNING: Never attempt to
dismantle any part of the
suspension units, as all units contain
pressurised oil. Skin and eye damage
can result from contact with the
presurised oil.
!!
WARNING: Ensure that the
!
correct balance between front
and rear suspension is maintained.
Suspension
imbalance
significantly
change
characteristics leading to loss of
control and an accident. Refer to the
chart overleaf for further information
!!
or consult your Triumph dealer.
!
WARNING: Ensure that the
adjusters are set to the same
setting on both forks. Settings which
vary from left to right hand forks may
affect handling resulting in loss of
control, and an accident.
NOTE:
!!
!
The setting figures over-page
are all measured as clicks out from
the fully screwed in position
unless stated otherwise.
and
good
handling
could
handling

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents