Triumph DAYTONA 650 Manual page 56

1. Locknuts
2. Adjuster nuts
3. Opening cable adjuster
4. Closing cable adjuster
5. Closing cable - - measurement point
Remove the seats.
•
Disconnect the battery, negative
•
(black) lead first.
Remove the fuel tank.
•
Release the locknut on the 'opening'
•
cable adjuster.
Rotate the 'opening' cable adjuster at
•
the twist grip end such that it has an
equal amount of adjustment in each
direction.
Rotate the 'opening' cable adjuster at
•
the throttle body end of the cable to
give 2- -3 mm of play at the twist grip.
Tighten the locknut.
Make any minor adjustments as
•
necessary to give 2-3 mm of play
using the adjuster near the twist grip
end of the cable. Tighten the locknut.
With the throttle fully closed, ensure
•
that there is 2-3mm of free play in the
'closing' cable.
'opening' cable if necessary.
Maintenance and Adjustment
Adjust as for the
Page 55
WARNING: Ensure that all the
adjuster locknuts of both
cables are tightened as a sticking
throttle could result from a loose
locknut.
An incorrectly adjusted, sticking or
stuck throttle will lead to loss of
!!
motorcycle control and an accident
!
Refit the fuel tank.
•
Reconnect the battery, positive (red)
•
lead first.
Refit the seats.
•
Check that the
•
smoothly, without undue force and
that it closes without sticking.
Ride carefully to your nearest
•
authorised Triumph dealer and have
him check the throttle system
thoroughly before riding again.
throttle opens