Download Print this page

Step 4 > Configure The Gateway - Siemens Gigaset SE567 Quick Start Manual

Residential wireless gateway
Hide thumbs


Option B > Configure the Macintosh
To setup the Gigaset® device, you must first configure your computer to obtain an IP address
from a DHCP server. Use the procedure below that corresponds to your system's operating
Configuring OSX
1. Click Apple > Preferences.
2. Select the Network icon under the
Internet & Network section.
3. Select Built-in Ethernet from the
Show drop-down menu.
4. Select Using DHCP Server from the
Configure IPv4 drop-down menu.
5. Click Apply Now and exit the System
Preferences window.
6. Configure the Gateway using the
steps that follow.
Step 4 > Configure the Gateway
Windows ME and XP users: If you have Universal Plug and Play (UPnP) enabled,
Windows may detect the Gigaset device upon startup and provide a shortcut to the
device on the desktop. The icon will be labeled Residential Gateway.
Double-click the icon and skip to step 3.
If your PC has not been connected to a broadband modem or other network device,
perform the PC configuration procedure below. Remember to restart each PC when finished.
1. Start your Web Browser.
2. In the address bar, type http://gigaset, then press Enter. The Gateway Setup Wizard
appears to guide you through the setup process.
3. When you have completed the Gateway Setup Wizard, you can connect to the Internet or
configure additional options on the Gateway.
You have completed installing your Gigaset device.
Configuring OS9
1. Click Apple > Control Panels > TCP/IP.
2. Select Ethernet from the Connect via
drop-down menu.
3. Select Using DHCP Server from the
Configure drop-down menu.
4. Close the window and save the
5. Configure the Gateway using the
steps that follow.

Hide quick links:



  Related Manuals for Siemens Gigaset SE567

This manual is also suitable for:

Gigaset se568