Connecting A Pc; Menu Operations; Common Operations - Sharp Aquos LC-19D1E Operation Manual

Using external equipment

Connecting a PC

Use the EXT 5 terminals to connect a PC.
EXT 5
ø 3.5 mm stereo minijack cable*
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 27 for a list of PC signals compatible with the TV.

Menu operations

Common operations

The following are three examples of basic menu operations. Please operate the menu by using the following
three patterns as a reference.
NOTE
• Select "Reset" under each MENU and for each Mode to
reset all adjustment items to the factory preset values.
• Press MENU or END to exit Menu. Press RETURN to return
to the previous display.
G
Menu Operation: A
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item, and
then press OK (Example: OPC, etc).
Picture
DYNAMIC
OPC [Off]
Backlight [+16] –
Contrast [ 32]
Brightness [ 0] –
Colour [ +4] –
Tint [ 0]
Sharpness [ +4] –
Advanced
Reset
4 Press a/b(c/d) to select the desired item,
press OK if necessary (Example: OPC setting).
On(Display)
On
Off
RGB cable*
+
+
+
+
EXT 5
PC
G
Menu Operation: B
1 Repeat steps 1 and 2 in Menu Operation: A.
2 Press a/b to select the desired menu item
(Example: Backlight, Contrast, etc).
3 Press c/d to adjust the item to your desired
position.
Backlight [+16]
Contrast [ 32]
Brightness [
Colour [ +4]
Tint [
Sharpness [ +4]
G
Menu Operation: C
1 Repeat steps 1 and 2 in Menu Operation: A.
2 Press a/b to select the desired menu item, and
then press OK (Example: Advanced, etc).
3 Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Film
Mode, etc).
C. M. S.-Hue
C. M. S.-Saturation
C. M. S.-Value
Colour Temp.
Film Mode
3D - Y/C
Monochrome
I/P Setting
4 Press a/b(c/d) to select or adjust the desired
item, press OK if necessary.
ø 3.5 mm stereo minijack cable*
RGB/DVI conversion cable*
– +
+
0] –
– +
0]
+
–
High
Mid-High
Middle
Mid-Low
Low
PC
9