Memorizing Channels; Memorizing The Channels By Auto Program - LG Color Television Owner's Manual

Basic TV operation

Memorizing Channels

This is the function to memorize all the active channels in your area before you can use the TV.
There are two ways of memorizing channels. You can use either.
One is called AUTO PROGRAM and the other is called MANUAL PROGRAM.
In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional
channels you want to add or delete, you can manually add or delete those channels.

Memorizing the Channels by AUTO PROGRAM

AUTO PROGRAM searches and memorizes all the active channels in
your area then you can select the desired channel with the
buttons.
Using the A.PROG button
You can conveniently perform AUTO PROGRAM using the AUTOPRG.
button on the remote control.
1. Press the AUTOPRG. button.
2. Press the G or AUTOPRG. button.
The AUTO PROGRAM starts now.
If you want to stop auto programming, press the ENTER (
Only the channels searched up to that time are memorized.
Notes : • If the programmed signal has poor quality, memorize again
in the
• AUTO PROGRAM stores all receivable channels regardless
of receiving signal (RF, Cable).
• If channels of general wireless TV and cable TV are duplicated,
press the number buttons (0 ~ 9) to change as .
Channels of general wireless TV
Using the MENU button
1. Press the MENU button and then
displayed as shown right.
G
2. Press the and then D
G
3. Press the button to enter the
4. The AUTO PROGRAM starts now.
.
Channels of Cable TV
D / button the until the menu is
E
/ E button to select
mode.
8
D /
E
) button.
A
CH.
.
%