Recording A Cd - Sony MHC-BX6AV Operating Instructions Manual

Mini hi-fi component system
Hide thumbs Also See for MHC-BX6AV:
Table of Contents

Advertisement

Recording a CD

— CD Synchro Recording
The CD SYNC button lets you record from a
CD to a tape easily. You can use a TYPE I
(normal) tape.
?/1
DISC SKIP
(Power)
EX-CHANGE hH
x
1
Press A and insert a recordable tape
into deck B.
With the side
you want to
record facing
forward
2
Press CD.
5
3
2
4
6
1
3
Press Z OPEN/CLOSE and place a
CD.
Then press Z OPEN/CLOSE again to
close the disc tray.
When the CD you want to record is not
selected, press DISC SKIP EX-CHANGE
repeatedly to select the CD you want.
Place with the
label side up.
When you play a
CD single (8 cm
CD), place it on
the inner circle of
the tray.
4
Press CD SYNC.
Deck B stands by to record in the
direction of the indicator on hH (the
right indicator lights to record on the
forward side and the left indicator lights
to record on the reverse side). The CD
player stands by for playback.
5
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6
Press REC PAUSE.
Recording starts.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B repeatedly to select deck B after step 1.
Press hH to start playback of the reverse side,
then press x where you want to start recording.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
Note
You cannot listen to other sources while recording.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhc-dx6av

Table of Contents