Download Print this page

Sony RDP-XF100IP Operating Instructions

Personal audio docking system

Advertisement

Quick Links

4-182-698-12(1)
Personal Audio
Docking System
Operating Instructions
RDP-XF100iP
©2010 Sony Corporation
Printed in China
Owner's Record
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
The model number and the serial number are located on the
14) Refer all servicing to qualified service personnel. Servicing
bottom.
is required when the apparatus has been damaged in any
Record the serial number in the space provided below. Refer to
way, such as power-supply cord or plug is damaged, liquid
them whenever you call upon your Sony dealer regarding this
has been spilled or objects have fallen into the apparatus,
product.
the apparatus has been exposed to rain or moisture, does
Model No. RDP-XF100iP
not operate normally, or has been dropped.
Serial No. _______________________________
For the state of california, USA only
Perchlorate Material –special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate
For customers in the USA
Please register this product on line at
Perchlorate Material: Lithium battery contains perchlorate
http://www.sony.com/productregistration
Proper registration will enable us to send you
RECYCLING NICKEL METAL HYDRIDE
periodic mailings about new products, services,
and other important announcements. Registering
BATTERIES
your product will also allow us to contact you in
the unlikely event that the product needs
Nickel Metal Hydride batteries are
adjustment or modification. Thank you.
recyclable. You can help preserve our
environment by returning your used
rechargeable batteries to the collection
and recycling location nearest you.
WARNING
For more information regarding recycling of rechargeable
batteries, call toll free 1-800-822-8837 or visit
To reduce the risk of fire or electric shock, do not
http://www.rbrc.org/
expose this apparatus to rain or moisture.
Caution:
Do not handle damaged or leaking Nickel Metal
To reduce the risk of fire, do not cover the ventilation of
Hydride batteries.
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
The validity of the CE marking is restricted to only those
To reduce the risk of fire or electric shock, do not expose
countries where it is legally enforced, mainly in the countries
this apparatus to dripping or splashing, and do not place
EEA (European Economic Area).
objects filled with liquids, such as vases, on the
apparatus.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Do not install the appliance in a confined space, such as a
Union and other European countries
bookcase or built-in cabinet.
with separate collection systems)
Do not expose the batteries (battery pack or batteries
installed) to excessive heat such as sunshine, fire or the
like for a long time.
As the main plug is used to disconnect the unit from the
Features
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
• iPod/iPhone compatible
The unit is not disconnected from the AC power source
• FM tuner with 20 station presets
(mains) as long as it is connected to the wall outlet, even
• Rechargeable battery for portable use
if the unit itself has been turned off.
• Audio in function
The nameplate and important information concerning
• Wireless remote commander supplied
safety are located on the bottom exterior of main unit
and on the surface of AC power adaptor.
You are cautioned that any changes or modifications not
Precautions
expressly approved in this manual could void your
authority to operate this equipment.
• Play the unit on the power source specified in
CAUTION
"Specifications. "
Danger of explosion if battery is incorrectly replaced.
• To disconnect the AC power cord (mains lead), pull it
Replace only with the same type.
out by the plug, not the cord.
• Since a strong magnet is used for the speaker, keep
NOTE
personal credit cards using magnetic coding or spring-
This equipment has been tested and found to comply with the
wound watches away from the unit to prevent possible
limits for a Class B digital device, pursuant to Part 15 of the
damage from the magnet.
FCC Rules. These limits are designed to provide reasonable
• Do not leave the unit in a location near a heat source
protection against harmful interference in a residential
such as a radiator or airduct, or in a place subject to
installation. This equipment generates, uses and can radiate
direct sunlight, excessive dust, mechanical vibration, or
radio frequency energy and, if not installed and used in
shock.
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
• Allow adequate air circulation to prevent internal heat
guarantee that interference will not occur in a particular
build-up. Do not place the unit on a surface (a rug, a
installation. If this equipment does cause harmful interference
blanket, etc.) or near materials (a curtain) which might
to radio or television reception, which can be determined by
block the ventilation holes.
turning the equipment off and on, the user is encouraged to try
• Should any solid object or liquid fall into the unit,
to correct the interference by one or more of the following
unplug the unit and have it checked by qualified
measures:
personnel before operating it any further.
– Reorient or relocate the receiving antenna.
• To clean the casing, use a soft cloth dampened with a
– Increase the separation between the equipment and receiver.
mild detergent solution.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
NOTES ON LITHIUM BATTERY
– Consult the dealer or an experienced radio/TV technician for
help.
• Wipe the battery with a dry cloth to assure a good
contact.
WARNING
• Be sure to observe the correct polarity when installing
• Replace the battery for the remote commander with a
the battery.
Sony CR2025 lithium battery. Use of another battery
• Do not hold the battery with metallic tweezers,
may present a risk of fire or explosion.
otherwise a short-circuit may occur.
• Battery may explode if mistreated. Do not recharge,
If you have any questions or problems concerning your
disassemble or dispose of in fire.
unit, please consult your nearest Sony dealer.
• Dispose of used battery promptly. Keep away from
children.
Important Safety Instructions
1)
Read these instructions.
2)
Keep these instructions.
3)
Heed all warnings.
4)
Follow all instructions.
5)
Do not use this apparatus near water.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9)
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Power sources
When the battery becomes almost fully depleted, "LOW
Preparing a power source
BATT" flashes and the unit will turn off. To charge the
battery, connect the AC power adaptor. ( See "Preparing
Charge the rechargeable battery before using this unit for
a power source. " )
the first time, or when the battery is depleted. You can
 
operate the unit while charging.
1
Connect the AC power cord (supplied) to the AC
power adaptor (supplied).
2
DC IN 20V
Connect the AC power adaptor to the
Notes
jack on the back of this unit firmly and plug it into a
• The remaining battery power will not be indicated when the unit is
wall outlet.
turned off.
• The unit requires at least 30 minutes to charge the battery if "LOW
BATT" appears.
• The battery indicator shows approximate remaining battery power.
• Operating conditions will affect the rate of battery depletion.
Battery life
When
Battery life
AUDIO IN
DC IN 20V
iPod playback
approx. 7hours*
FM reception
approx. 7hours
Measured in accordance with the JEITA (Japan
Electronics and Information Technology Industries
Association) standard.
* Measured using a fully charged rechargeable battery with a fully
To wall
charged iPod classic playing back.
outlet
When to replace the rechargeable
battery pack
AC power
AC power
Repeated recharging causes the capacity of the
adaptor
cord
rechargeable battery power to decrease over time. Replace
the rechargeable battery pack when its capacity becomes
Note on the AC power adaptor
half the usual time, even after charging the battery fully.
• Use the Sony supplied AC power adaptor only. The polarity of the
plugs of other manufactures may be different. Failure to use the
Note
supplied AC power adaptor may cause the unit to malfunction.
• The rechargeable battery pack is not a commercially available
product. To purchase a rechargeable battery pack (NH - 2000 RDP),
consult with your nearest Sony dealer.
3
Confirm that charging has started.
Replacing the rechargeable
When charging start, the battery indicator appears.
battery pack
While charging, the charging indicator animation
loops.
1
UNLOCK
When the unit is turned off
Slide the latch to
, and slide
the direction of the arrow on the bottom of this unit.
The battery compartment cover opens, then remove
the cover.
2
Use a coin, etc., to pull out the rechargeable battery
When charging completes, the full battery indicator
pack.
appears for a while, and then disappears.
3
Remove the rechargeable battery pack and disconnect

the lead from the jack inside the battery compartment.
4
Connect the lead of a new rechargeable battery pack
to the jack and insert the battery in the unit.
Notes
5
Close the battery compartment cover and slide the
• If you connect the AC power adaptor when the battery is fully
latch to
LOCK
.
charged, the full battery indicator appears for a while, and then
disappears.
• If you connect the AC power adaptor when the battery power is low,
charging starts and the low battery and charging indicator
animation loops.
The unit cannot perform operations without the AC
power adaptor while the low battery indicator
appears.
 
1
When the unit is turned on
When charging completes, the full battery indicator
2
appears.
Note
• It will take approximately 7 hours to charge the battery.
3
Using the rechargeable
battery
You can operate the unit with the rechargeable battery
instead of the AC power adaptor.
Note
• The maximum output will be lower when the AC power adaptor is
4
disconnected.
To check the remaining power of the
battery
The remaining power of the battery will be indicated
when the unit is turned on. As the remaining battery
5
power depletes, the battery indicator decreases.
Level 1
Level 2
Level 3
Level 4
Notes
• Charge a new battery pack before use. See "Preparing a power
source" for details.
• Turn off the unit, before replacing the rechargeable battery pack.
• When replacing the rechargeable battery pack, place a soft cloth,
etc., under the unit.
Preparing the remote
commander
Before using the remote commander for the first time,
remove the insulation film.
To know when to replace the battery
With normal use, the battery (CR2025) should last for
about 6 months. When the remote commander no longer
operates the unit, replace the battery with a new one.
CR2025
Notes
• Do not attempt to charge the battery.
• If you are not going to use the remote commander for a long time,
remove the battery to avoid any damage that may be caused by
leakage and corrosion.
RELEASE
in

Advertisement

loading

Summary of Contents for Sony RDP-XF100IP

  • Page 1 • Use the Sony supplied AC power adaptor only. The polarity of the like for a long time. plugs of other manufactures may be different. Failure to use the Note supplied AC power adaptor may cause the unit to malfunction.
  • Page 2 You can enjoy the sound from an optional component When an FM stereo broadcast is received, “STEREO” • Sony cannot accept responsibility in the event that data recorded on You can set the power off hold function in order to avoid...