Getting started
Connecting the base with the phone network and the mains
power supply
2
1
3
3
¤
Insert the phone cable (cable slightly flattened) into the lower connection socket
rear of the base.
¤
Insert the power cable for the power adapter into the upper connection socket
rear of the base.
¤
Insert both cables into the appropriate cable channels
¤
Connect the power adapter
Please note:
u
The power adapter must always be connected, as the phone will not operate without a
power supply.
u
Only use the power adapter and phone cord supplied. Pin connections on telephone cables
can vary.
Wall mounting the base (optional)
4
4
5
4
and finally the telephone jack
3
.
5
.
at the
1
2
at the
el en