Specifications; Trademark Acknowledgements; Unpacking - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

speciFicatiOns

Video Standard NTSC/PAL
4-Input Channels/1-Output
Video
Channel
1-Input Channel/1-Output
Audio
Channel
Resolution
Preview
Features
Resolution
Recording
Features
Quality
Hard drive 250 gigabite hard drive
Audio ADPCM2 CODEC
Video MPEG4 Compression
Motion Selectable Area and Sensitivity
Detection Detection
Microprocessor 32-bit RISC Processor
Network
RJ45
Interface
HDD Port Support SATA Hard drive
USB Port USB 2.0
Audio Port Optional
Remote
Support IR Remote Control
Control
Input: 120 V ~ / 60 Hz
Adapter
Output: 12 VDC, 5A
SKU 67139
NTSC:
20x480@30fps
(each CH)
PAL:
720x576@25fps
(each CH)
Full-DI, 1-Channel/4-
Channel/1-Channel
Playback
NTSC: 720x240@
60fps (Total)
PAL:
720x288@50fps
(Total)
Variable Frame
Rate, up to 200 hrs,
recording time
4 Levels
For technical questions, please call 1-800-444-3353.
4 Infrared Day/Night Cameras
(Two 3.6mm wide angle and
two 6mm for longer range, all
are color in daylight and black
Included & white infrared night viewing),
Accessories Camera Cables, Remote
Control, USB Cable, Cable
Splitter, Power Cord, Power
Adapter, Software CD, Two AAA
Batteries,
nOtice: Camera surveillance may be
prohibited by laws that vary from
state to state. Check laws in your
area before using for surveillance.
This device complies with part 15 of
the FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
To the extent that you use this unit
with software other than what is provided,
we will not be responsible for any loss or
damage to your computer or contents.

trademark acknowledgements

Ethernet, Internet Explorer (IE), Ac-
tiveX, DivX, and Windows XP, Windows
Vista are registered trademarks of the
respective holders.

unpacking

When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
rev 10h
Page 7