Honda Civic 2009 Navigation Manual page 125

Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
During the day, I turned on the lights because it started to
rain, but the screen went dark. How can I make it still display
day mode?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
124 Navigation System
The system thinks it is in Day display mode. Verify the following: The
display mode in Setup is set to Auto, the dash brightness is not set to
maximum (must adjust with headlights on), and Map Color in Setup is set
to Black for Night. See Display on page 75.
Verify the following: The display mode in Setup is set to Auto, and Map
Color in Setup is set to White for Day. See Display on page 75.
Adjust the dash brightness (+) button (with headlights on) to full brightness.
Remember to set it back to a medium setting, or at night, the screen will be
bright. See Display on page 75.
The navigation system was not designed for this. However, you can view
the coordinates of an address by touching the vehicle position icon on the
map. See Map Screen Legend on page 50.
Go to "Personal Information" in the Setup screen (second), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page 81.
PINs are optional. See information regarding PINs on page 81. Your dealer
can reset the PIN for you.
Solution