Audio Setting - Panasonic CQ-C5100N Operating Instructions Manual

E

Audio Setting

N
G
L
I
S
H
25
1 1 2 2
Volume
Default: 18
Setting range: 0 to 40
Bass/Treble
You can adjust the bass and treble sound.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
SQ Setting
You can adjust the characteristics of the currently selected
sound type (SQ).
Adjustable frequency:
60 Hz, 160 Hz, 400 Hz, 1 kHz, 3 kHz, 6 kHz, 16 kHz
Setting range:
–12 dB to +12 dB (by 2 dB)
FTo return an adjusted SQ to the default setting
qPress [SQ], and select the SQ which is to be returned to the
default setting.
wPress and hold [BAND] for more than 2 seconds.
26
CQ-C5400/C5300/C5100N
Turn [VOLUME].
[]] [[]
CQ-C5400N CQ-C5400N
Press [VOLUME]
(SEL: select).
BAND
[DISP]
(Return to regular mode)
3 3 4 4 5 5 6 6
Press [VOLUME] (SEL: select)
to open the menu.
Press [VOLUME] (SEL: select) .
Press [VOLUME] (SEL: select) .
Press [VOLUME] (SEL: select) .
The SQ adjustment mode can be
established also by pressing [SQ]
for more than 2 seconds.
Regular mode VOLUME
HPF
SUBW LPF SUBW LEV
Note:
¡ Press [DISP] to return to the regular mode.
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume
setting, 10 seconds in the SQ), the display returns to regular mode.
¡ Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned
above causes distortion to the audio signal, readjust bass/treble or volume.
Turn [VOLUME].
q : Up
w : Down
Turn [VOLUME].
q : Increased
w : Decreased
Turn [VOLUME].
q : Increased
w : Decreased
q
Press [[] or []] to select a frequency.
[[]: Higher frequency
[]]: Lower frequency
w
Turn [VOLUME].
q : Increased
w : Decreased
e
Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the number
of the selected button, and the regular
display is restored.
Note:
¡ Only buttons [2] to [6] can be used to preset the adjusted SQ. An adjusted SQ cannot be preset in button [1].
¡ To call a preset SQ, refer to page 7.
¡ While the SQ adjustment mode is established, Only adjustments are performed, and even if the adjustment
mode is exited without presetting an adjusted effect, what has been set will be reflected as the current SQ until
another SQ is selected.
¡ The call-up screen is unchanged even after adjusting any SQ preset.
BASS TREBLE
SQ SET
FADER BALANCE
Example: Preset button [4]
CQ-C5400/C5300/C5100N
E
N
G
L
I
S
H
26 1
27