Index Delay Adjustment - Mitsubishi Electric WD-60C10 Service Manual

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
Index Delay Adjustment (Perform after color wheel replacement)
V43C & V43
1. Enter the Service Menu
2. Select "Calibration" <ENTER>. The raster will blank out.
3. Enter the Index Delay adjustment by pressing <2-5-8-0>. The ramp pattern below will be displayed and the
STATUS LED will blink Green at a 1 second interval during the alignment..
4. Use the Navigation <
dark to bright.
5. Press <ENTER> to save the adjustment data.
Index Delay Adjustment (Perform after color wheel replacement)
V43+ & V43++
1. Enter the Service Menu
2. Select the Ramp Pattern shown below
3. Use the <VIDEO> button to select the adjustment, "60.IDL"
4. After selecting the IDL adjustment item, use the Navigation <
bars for the smoothest transition from dark to bright.
5. Press <ENTER> to save the adjustment data.
<MENU><2-4-7-0>
V43C & V43 Index Delay Adjustment
<MENU><2-4-7-0> "Calibration" <ENTER><2-5-8-0>
> buttons to adjust the ramp pattern color bars for the smoothest transition from
<MENU><2-4-5-7>
<
V43+ & V43++ Index Delay Adjustment
<MENU><2-4-5-7> < > <
SERVICE
TVM
60.IDL
.
The STATUS LED will turn Red while the data is saved.
.
>< > x3.
> < > < > <VIDEO>
Adjustment
Data
201
> buttons to adjust the ramp pattern color
The on-screen display will turn red while the data is saved.
Page 35