Download  Print this page

Reset And Initialization - Mitsubishi Electric WD-60C10 Service Manual

Hide thumbs

Advertisement

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
SERVICE TIP:
Many symptoms that are customer generated, intermittent or cannot be verified can be resolved by using the various
Reset and Initialization options. Before visiting the customer's home ask the customer to 1st perform a System Reset by
pressing the <POWER> button on the front panel and holding it for 8 seconds. If this does not resolve the issue, they
can perform an A/V Reset by pressing the
for 10 seconds. Then, if necessary, perform a user level Initialization by pressing <MENU><1-2-3> <ENTER> with the
remote. The customer should be made aware when settings and/or options will be reset. For more information, see the
chart below.
Reset Name When to use
Remote Control
Returns the remote control TV layer
TV Layer Reset
to normal operation.
Remote Control
Returns the volume and mute func-
TV Volume/
tions of the remote control to TV vol-
Mute functions
ume and mute for TV, Cable/Sat,
VCR and DVD layers after the Audio
Lock for AV Receiver feature has
been used.
A/V Memory
When the audio or video performance
Reset, by indi-
or settings for a single input seem to
vidual input
be incorrect.
A/V Reset, all
When the audio or video performance
inputs
or settings for more than one input
seem to incorrect.
System Reset
To reset the TV when it does not turn
on or off, does not respond to the
remote control, front panel buttons or
has other unusual symptoms.
Initialize User
To reset all customer settings except
Level
V-Chip
Initialize - Ser-
To reset all customer settings
vice Level
V-Chip Pass-
If V-Chip password is not known
word Bypass
Unlock Front
To unlock the front panel if it has
Panel
been locked in the V-Chip Menu.
RESET / INITIALIZATION
<INPUT> + <VOL
>
buttons on the front panel at the same time and holding
How to use
1)
Set the selector switch to TV position.
2)
Press and hold the <POWER> button until it flashes twice
then release the button.
3)
Enter the code <0-0-9-3-5>.
1)
Set the selector switch to TV position.
2)
Press and hold the <POWER> button until it flashes twice
then release the button.
3)
Enter the code <9-9-3>< VOL
<MENU>
Audio/Video
AV Reset <ENTER>
While viewing the TV, press the front panel buttons <INPUT> +
<VOL
> at the same time and hold for 10 seconds.
Press the <POWER> button on the front panel and hold it for 8
seconds.
Press <MENU><1-2-3><ENTER>
V43C/V43 <MENU>2-4-7-0>"Reset Settings"
V43/V43+<MENU><2-4-7-0> "INITIALIZE" press <ENTER>
Press <LAST>+<9> at the same time.
Press and hold the front panel <ENTER> button for 8 seconds.
Page 28
Resulting Action
Once the valid code has
been entered and con-
firmed, the remote control
has been reset.
The remote will now operate
the TV's volume and mute
when the slide switch is in
>.
the TV, CABLE/SAT, VCR
or DVD positions.
All Audio and Video settings
for the individual input are
reset except for the Listen
To, Language, Balance and
Closed Caption settings.
All Audio and Video settings
are reset to the factory de-
fault settings. No other
menu options are changed.
TV Micro Re-boots. Note:
The changes made during
the current TV-On period
may be lost. All other previ-
ous user settings are not
lost.
All customer menu options
and A/V settings except V-
Chip & locked ISF are reset
to factory default.
All customer menu options
and A/V settings are reset
to factory default.
Password will be bypassed.
If in the V-Chip menu, enter
a new password.
Front Panel becomes op-
erational. Other V-Chip
settings not changed. Note:
Cannot be performed while
in the Low Power mode and
the set is Off.

Advertisement

Table of Contents

   Also See for Mitsubishi Electric WD-60C10

   Related Manuals for Mitsubishi Electric WD-60C10

Comments to this Manuals

Symbols: 0
Latest comments: