Mitsubishi Electric WD-60C10 Service Manual page 27

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
DIGITAL SIGNAL INFORMATION
Information on the currently selected digital channel can be displayed on screen.
1.
Enter the Option / Service Menu <MENU><2-4-7-0>
V43C & V43 Option / Service Menu
<MENU><2-4-7-0>
Service Menu
1. Information
2. Reset All Settings
3. Calibration
4. Test Pictures
VERSION: Vxx xxx.xx.xx
2. V43C & V43 Chassis select "Information" and <ENTER>.
V43+ & V43++ Chassis select "Digital Signal Strength" and <ENTER>.
V43C & V43 Digital Signal Information
"Information" <ENTER>
System Info
Source/Channel Info
Source ID
Source Type: Composite
Source/Channel Status: No Source Signal
RF Band: Air
RF Channel: 0
Frequency: -
Signal Quality: 0
Video PID: -
Audio PID: -
PCR PID: -
Audio/Video Stream Info
Video Resolution: -
Video Scan Rate: -
Video Scan Type: -
Audio Type: PCM
Audio Sample Tate: 48k
V43+ & V43++ Option Menu
<MENU><2-4-7-0>
Initialize
Power Restore
Production Mode
Digital Signal Strength
NetCommand Software
Total hours of use
V43+ & V43++ Digital Signal Information
"Digital Signal Strength" <ENTER>
Frequency(MHz)
Signal Level
Modulation
Carrier Lock
SNR
Correctable errors
Un Correctable errors
Page 27
OFF
OFF
<1~9>
Vxx xxx.xx
0
Tuner
749
<1~9>
8VSB Air
Locked
29.09
0
0