Mitsubishi Electric WD-60C10 Service Manual page 14

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
Duct Interior Components
Duct Interior Components are shown below.
Notes:
• The Upper Duct must be removed to replace the Lamp Door Switch PWB, Sirocco Fan and Exhaust Fan.
• When replacing the Optical Engine, transfer all Duct and Duct Interior Components from the old Engine to the
new Engine.
• The Exhaust Fan must be installed so the Label is facing inside the Duct.
• The Sirocco Fan must be installed so the Label is facing up with the Flanges aligned onto the Guide Pins.
Sirocco Fan Flanges
Align Onto Guide Pins
SIROCCO FAN
(Label Facing Up)
PWB-LAMP DOOR SW
EXHAUST FAN
Page 14
(Label Facing In)