Install AA batteries
To install the batteries, ensure that
the speakers are switched off, and
press the release switch of the
battery cover at the back of each
speaker. Lift the cover.
Place the batteries as indicated in
the compartment. To close the
cover, insert the catch at the top of
the cover into the corresponding
slot on the speaker, and push the
cover against the speaker until it
snaps into place.
During long periods where the
speakers are not used, remove the
batteries to prevent damage from
battery leakage.
When battery power is low, the
orange indicator light starts to
flash, and the speakers beep.
Switch the speakers on or off
To switch on, press and hold the
power key until the white indicator
light turns on.
To switch off, press the power key.
The orange indicator light is briefly
displayed.
Connect the speakers
You can connect the speakers to a
compatible music device (such as a
music player or mobile phone with
a music player feature) using
Bluetooth wireless technology or
the supplied cable. To use a
Bluetooth connection, the music
device must support the A2DP
Bluetooth profile.
Pair and connect using Bluetooth
wireless technology
The following instructions apply for
a mobile phone but the procedure is
the same for a music player, except
that you may not need to give the
Bluetooth passcode.
1. Ensure that the speakers are off
© 2007 Nokia. All rights reserved.
and that the phone is on.
5
Need help?
Do you have a question about the MD-7W and is the answer not in the manual?
Questions and answers