Pans For The Sensor Frying System; Frying Settings; Setting The Sensor Frying System; Frying Table - Siemens ET9 Series Instruction Manual

Pans for the sensor frying system

System pans as optional accessories
You can also purchase a frying pan which is ideally suited to
frying using the sensor frying system from your specialist
electrical retailer or at www.siemens­eshop.com: HZ390230

Frying settings

Frying Temperature
setting
high
max
medium ­ high
med
low - medium
low
low
min

Setting the sensor frying system

Select the appropriate frying setting from the table. Put the pan
on the hotplate.
The hob must be switched on.
Touch the S symbol. The
1.
possible frying settings appear in the display menu.
Within the next 10 seconds, select the desired frying setting
2.
on the settings range. The sensor frying system is activated.
The large dual-circuit hotplate is switched on automatically.

Frying table

The table shows which frying setting is suitable for which dish.
The frying time may depend on the type, weight, thickness and
quality of the food.
Escalope, plain or breaded
Meat
Fillet
Chop
Cordon bleu schnitzel
Steaks, rare (3 cm thick)
Steaks medium or well done (3 cm thick)
Poultry breast (2 cm thick)
Sausages, pre-boiled or raw
Hamburgers/rissoles
Meat loaf
Strips of meat, gyros
Minced meat
Bacon
Fish, fried
Fish
Fish fillet, plain or breaded
Scampi, prawns
* Place in a cold pan
Suitable for
e.g. potato fritters, roast potatoes and rare steaks.
e.g. thin food, such as escalope, frozen breaded products, strips of meat, vegetables
e.g. thick food, such as rissoles and sausages, fish
e.g. omelettes, food fried in butter, olive oil or margarine
in the display lights up. The
'
PLQ ORZ PHG
PLQ ORZ PHG
Both availability and whether it is possible to order online differ
between countries.
The frying settings given below have been adjusted to the
system pans.
Note: The sensor frying system may also work with other pans.
Test the pans first with low frying settings, changing as
necessary. The pans may overheat on high frying settings.
PD[
The temperature symbol remains lit until the frying temperature
PD[
is reached. Then a signal sounds. The temperature symbol
goes out.
Add the fat and then the food to the pan.
3.
Turn as normal to prevent burning.
Switching off the sensor frying system
Set to 0 on the settings range.
The frying settings given are for the system pans. The frying
settings may vary if you use different pans.
ORZ
Frying Total frying time after the
setting signal sounds
med 6-10 minutes
med 6-10 minutes
low 10-17 minutes
low 15-20 minutes
max 6-8 minutes
med 8-12 minutes
low 10-20 minutes
low 8-20 minutes
low 6-30 minutes
min 6-9 minutes
med 7-12 minutes
med 6-10 minutes
min 5-8 minutes
low 10-20 minutes
low/med 10-20 minutes
med 4-8 minutes
7