Advertisement
Ensure that the mounting device or
mobile holder is not installed where
you might come in contact with it in
the event of an accident or collision.
Periodically check that the suction cup
at the bottom of the mounting device
is firmly attached to the windscreen or
dashboard, especially if the ambient
temperature changes a lot.
Never leave the mounting device
inside the vehicle in direct sunlight or
Attach to a windscreen
Attach the holder to the
mounting device
To attach the mobile holder to the
mounting device, insert the catch on
the mounting device into the slot at
the back of the holder (see step 1A at
the start of this guide). Rotate the
holder clockwise about 90 degrees
until it locks into place (1B).
in excessive heat. The mounting
device and suction cup may be
damaged and adhesion may be
impaired if the inside temperature
exceeds +70°C (160°F).
When attaching a mobile holder,
ensure that the display of the mobile
device is clearly visible for the user.
For your safety, install the holder in
the upright position.
To detach the holder from the
mounting device, rotate it
anticlockwise.
Attach the mounting device to
the windscreen
Before you attach the mounting
device to the windscreen, locate a safe
mounting surface on the windscreen,
ENGLISH
Advertisement
