Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
The control panel
FRQWURO SDQHO SDXVH
H[WHQGHG FRRNLQJ ]RQH
When you touch a symbol, the respective function is activated.
Dual-circuit hotplate, hotplate
with extended cooking zone
When the hotplate is activated: the corresponding display lights up.
When the hotplate is switched on: the last selected size is automatically selected again
Residual heat indicator
The hob has a two-stage residual heat indicator for each
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
© HOHFWURQLF ERLO
Activating and deactivating
UHVLGXDO KHDW ¤
RSHUDWLQJ UHDGLQHVV ¯
IRU VHWWLQJ WKH KHDW VHWWLQJ
IRU VHWWLQJ WKH WLPHU
Always keep the controls dry. They are adversely affected by
Bending or striking the metal panel, e.g. by knocking a pot
against it, may cause a malfunction.
symbol; the 2nd filament circuit is activated
symbol; the extended cooking zone is activated
chocolate. As the hotplate cools down further, the display
You can set the heat settings and the timer by turning the
You can remove the setting discs. This makes cleaning easier.
You can also remove the setting discs when the hotplate is in
operation. The hotplates switch off after 3 seconds. The
residual heat indicator H/h appears in the display.
If you refit the setting disc during operation, you can make new
Always place the setting disc in the recess with the high-gloss
side facing down.
Í GXDOFLUFXLW KRWSODWH
k GXDOFLUFXLW KRWSODWH
ZLWK H[WHQGHG FRRNLQJ
. The display remains lit until the hotplate has