Time Display - TECHWOOD CDC86 Owner's Manual

CD PLAYBACK
Erasing all the programmed contents
1. Press the program (
PROGRAM
CLEAR
2. Press the clear ( ) button and hold it for longer than 2
seconds.
- All the programmed contents will be cleared
from memory.
Note:
The Program button and the clear button can work only in
the stop mode.
* Changing the programmed contents
Deleting:
Undesired tracks can be deleted from the originally pro-
grammed contents.
1. Press the program (
PROGRAM
number that you want to delete appears on the display.
CLEAR
2. Press the clear ( ) button.
- The track number will be deleted from the programmed
contents.
- If you press the button repeatedly, the next programmed
tracks will be deleted one by one each time the button is
pressed.
Adding after the last track:
1. Press the program button repeatedly until "END" appears
on the display.
2. Enter new tracks using the programming procedures
after "END" disappears from the display.
Adding to any position:
1. Select the program number which you want to add a new
track to by pressing the program button.
2. Enter the new track by using the programming
procedures.
) button .
) button repeatedly until the track

Time Display

STEPS 1 THROUGH 4
COMPACT DISC CHANGER CDC86
OPEN DISC SKIP
1 2
CLOSE
EX-CHANGER
3 4 5
POWER
STANDBY
Status of the display
This unit can display four types of time mode on the time
counter in the display.
STEP 1. The elapsed time of the current track is
automatically displayed when playback begins.
02
INDEX
1
STEP 2. During playback, press the display button once and
the time remaining on the track is displayed.
02
INDEX
1
REMAIN
STEP 3. Press the display button again and the total elapsed
time of the disc being played is displayed.
02
INDEX
1
TOTAL
STEP 4. Press the display button once more and the total
remaining time of the entire disc display will be
displayed.
02
INDEX
1
REMAIN
Notes:
Time will not be displayed during programmed play if the
programmed contents exceed 100 minutes. In this case,
"--,--" will be shown instead.
If you press the display button in the stop mode, the total
track number and the total playing time of the current disc
will be displayed.
9
1
2,3 & 4
SHUFFLE
MENU
0.26
3.14
5.47
48.25
TOTAL
REPEAT
PROGRAM CANCEL