TECHWOOD DDR 94 Owner's Manual page 6

Connection
Speaker layout example when using SURROUND MODE or 3 STEREO
SURROUND
B
A
C
Positioning of the Speakers
The positioning of speakers differs according to the size
and acoustics of the listening room. While actually
listening to a program source, try various speaker
positions to determine which layout provides the best
surround effect.
Place the speakers connected to "L" to your left, and "R"
to your right.
A Front speakers
Use magnetic shielded speakers, if you are using it near
your TV.
Place the front speakers in front of the listening position,
to the left and right of a TV.
Front speakers are required for all surround modes.
VCR
A
D (OPTIONAL)
C
3 STEREO
A
Center speaker
B
Use magnetic shielded speaker, if you are using it near
your TV.
Place a center speaker between the front speakers, on
or below the TV.
This speaker improves sonic imaging and depth of field.
Be sure to connect a center speaker when using the 3
STEREO mode.
C Rear speakers
Install these speakers above the level of the listener's
ears, to the left and right.
Do not install the rear speakers too far behind the
listening position. It might be effective to direct the rear
speakers towards a wall or ceiling to further disperse
the sound.
D Subwoofer (Optional)
Reproduces powerful and deep bass sounds.
Use a subwoofer with built-in amplifier.
A Subwoofer is not required but may be added as an
option
Connect the component with RCA to RCA cords. Make
sure to connect :
white plug to white jack(L:left)
red plug to red jack(R:right)
yellow plug to yellow jack(VIDEO)
6
B
A
(OPTIONAL)
D