Table of Contents
Advertisement
Reset the unit. /
Vehicle-specific Wiring Harness
(separately purchased) /
For your reference /
:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
1
*
Not supplied for this unit.
*
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated
with paint.
ELECTRICAL CONNECTIONS /
Signal cord /
Connecting the microphone unit /
Secure using cord cramps *
1
if
necessary /
1
*
G Microphone /
or /
Rear ground terminal /
Factory wiring harness (vehicle) /
Remote adapter /
Join the same color leads together. /
To join the open-ends of the leads /
Strip lead ends /
Twist ends together /
Recommended connection /
Automatic antenna (250 mA max.) /
Amp Turn-on (200 mA max.) /
Illumination /
Brown /
Telephone Muting /
12 V Battery /
12 V Ignition Switch /
Ground /
Front speaker (left) /
Front speaker (right) /
Rear speaker (left) /
Rear speaker (right) /
JVC Amplifier /
1
*
Adjust the angle /
or /
H Microphone clips /
Antenna terminal /
Light blue (yellow stripe) /
*
1
Caution /
Blue /
Blue (white stripe) /
Orange (white stripe) /
(Not used /
Insulate to prevent short circuit /
Yellow /
Red /
Black /
White /
White (black stripe) /
Gray /
Gray (black stripe) /
Green /
Green (black stripe) /
Purple /
Purple (black stripe) /
1
*
*
2
2
SW :
To subwoofer /
FRONT : To front speakers /
REAR :
To rear speakers /
MIC
(Microphone input terminal /
E Power cord /
Solder /
Tape /
Power cannot be turned on? /
)
Ignition switch /
Separate red lead /
If your vehicle factory wiring harness does not
have "12 V ignition switch" lead, connect the
red lead of the supplied power cord, E, to the
vehicle fuse block (through a separate red lead
provided with the fuse tap). /
USB cable (approx. 1.2 m) /
10 A fuse /
Remote lead /
Extention lead /
1
*
Fuse block /
E
Hide quick links:
Advertisement
Table of Contents
