First-Time Installation; About Smart Card; Connecting A Hi-Fi System; First-Time Installation General Information - Nokia Mediamaster 119 C User Manual

Mediamaster

Hide thumbs Also See for Mediamaster 119 C:

Table of Contents

Connecting the Mediamaster & First-time installation

The Mediamaster is equipped with a built-in decoder for the Irdeto

encryption system.

Insert a valid smart card fully into the slot on the back of the

Mediamaster. The gold chip must face downwards and inwards.

It is possible to connect a TOS link cable from the Digital audio out-

put on the Mediamaster to a Hi-fi system that is equipped with the

corresponding audio input.

Also use the TOS link Digital audio output for connection to an

external Dolby digital/DTS decoder

Once you have correctly connected the Mediamaster, you will also

have to perform a "First-time installation." During this procedure,

helpful information is displayed at the bottom of the menus.

The ok button always confirms a selection within the menus, and

pressing it will take you to the next step in the installation proce-

dure. However, more than one value sometimes have to be entered

in a menu. First, perform all necessary settings on the different

lines. Then, confirm them all simultaneously by pressing ok.

• You can always return to the previous menu by pressing back.

• Use the cursor up/down button to move upwards and down-

wards from one line to another.

• Use the cursor left/right button to change settings

• You also use the number buttons on the remote control to enter

numeric values.

• Plug in your Mediamaster and the "First-time installation" menu

is shown.

Press ok to continue.

GB 8

Table of Contents