American Standard Chandler Americast 7162 Installation Instructions

CHANDLER™ AMERICAST™ KITCHEN SINK
DOUBLE BOWL MODEL 7255
SINGLE BOWL MODEL 7162
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
BEFORE YOU BEGIN...Unpack new sink and
inspect carefully for damage. Replace the sink
in its original packing carton to protect it until
you are ready to begin installation.
Recommended Tools & Materials
Silicone Sealant
Putty Knife
Pipe Wrench
Channel Locks
Phillips Screwdriver
Regular Screwdriver
Adjustable Wrench
Drill
DOUBLE BOWL MODEL 7255
CUTOUT FOR NEW INSTALLATION
36" (914mm)
10-1/2"
(267mm)
21"
(533)
CUTTING
LINE
MODIFICATION REQUIRED TO FIT CHANDLER SINK
INTO A STANDARD 33" X 22" SINK CUTOUT
10-1/2"
(267mm)
19-1/2" (495mm)
CENTER LINE
CUTTING
LINE
Product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
Installation
™
Instructions
Mineral Spirits
Basin Wrench
Saber Saw
Tubing Cutter
Tape Measure
Hacksaw
Scissors
32" (813mm)
(559mm)
1/2"TYP.
SINK
OUTLINE
35" (889mm)
1-1/2" (38mm)
21"
(533mm)
32" (813mm)
19-1/2" (495mm)
1/2"TYP.
SINK
OUTLINE
CUTOUT DIMENSIONS FOR SINK
Locate and mark center lines of sink on countertop.
Provide proper clearance under the countertop for
the faucet supply lines and the structural parts of the
cabinet.
Cut out correct template and trace the cut line onto
the countertop at the proper location.
NOTE: If replacing an existing sink be certain to shut
off water supplies before removing old sink.
SINGLE BOWL MODEL 7162
CUTOUT FOR NEW INSTALLATION
10-1/2"
(267mm)
22"
21"
(533)
MODIFICATION REQUIRED TO FIT CHANDLER SINK
INTO A STANDARD 25" X 22" SINK CUTOUT
10-1/2"
(267mm)
Certified to comply with ANSI A112.19.4.M
U.S. Patent No. 4,664,982
Other patents pending.
CAN/C.S.A. B-45
Observe local plumbing and building codes.
7 9 1 2 6 6 - 4 0 0 R e v . B
28" (711mm)
24" (610mm)
CUTTING
SINK
LINE
OUTLINE
27" (686mm)
1-1/2" (38mm)
21"
(533mm)
24" (610mm)
19-1/2" (495mm)
CENTER LINE
19-1/2" (495mm)
1/2"TYP.
CUTTING
LINE
SINK
OUTLINE
© American Standard Inc. 2003
22"
(559mm)
1/2"TYP.