Central Machinery 45861 Set Up And Operating Instructions Manual page 20

3. Lubricate the Gearbox through the
four oil caps. Add a few squirts of oil
every three hours of use.
4. Lubricate the leadscrew and lead-
screw bearing frequently.
5. Lubricate the tailstock oiling point
every five uses, or once per week if
used frequently.
SKU 45861 For technical questions, please call 1-800-444-3353.
6. Wipe down the ways and slides after
each use and lubricate with white
lithium grease.
7. Applying oil to the bedways and other
metal parts will protect the Lathe from
rusting and pitting.
pleaSe read the FOllOwing
careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS
A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
Page 20