Cleaning The Door Seal And Window; Cleaning The Drain Filter - Panasonic NA-140VG3 Operating Instructions & Installation Instructions

Cleaning the door seal and
window
After each wash, perform the following:
- Remove any objects from the door seal.
- Wipe the window and seal to remove lint
and stains.

Cleaning the drain filter

We recommend cleaning the drain filter
every 1 month. Filter will have lint buildup,
reduces the water from the shower.
1. Switch off and unplug the appliance.
2. Open and remove the drain filter
cover. Remove the cover and place a
container to receive the drain water.
Cap
Pump hose
Drain filter
3. Pull out the pump hose and remove
the cap to drain the water.
NA-168VG3_English.indb 23
Maintenance
4. After all the water has drained away,
loosen the drain filter.
5. Carefully loosen the drain filter. More
water may drain out.
This is normal.
6. Turn the drain filter anticlockwise to
unscrew it. Then, remove it.
7. Remove any lint and debris.
8. Replace the drain filter.
9. Replace the cap and pump hose to
the original position.
Caution
BE CAREFUL when draining hot
water.
Maintenance - 23
2011-1-24 11:25:12