Taking Pictures With The Self-Timer - Panasonic LUMIX DMC-FX37 Operating Instructions Manual

Digital camera model no. dmc-fx37
Hide thumbs Also See for LUMIX DMC-FX37:
Table of Contents

Advertisement

񷿨
[REC] mode:

Taking Pictures with the Self-timer

1
Press 2 [ë].
2
Press 3/4 to select a mode.
You can also press 2 [ë] to select.
3
Press [MENU/SET].
You can also press the shutter button halfway to finish.
The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
4
Press the shutter button halfway to focus
and then press it fully to take the picture.
The self-timer indicator A blinks and the shutter is
activated after 10 seconds (or 2 seconds).
If you press [MENU/SET] while the self-timer is set, the
self-timer setting is cancelled.
Note
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the self-timer indicator will blink and then may turn on brightly
operating as an AF assist lamp (P66) to allow the camera to focus on the subject.
We recommend using a tripod when recording with the self-timer.
The number of pictures which can be taken in [BURST] is fixed to 3.
The number of pictures which can be taken in [FLASH BURST] in scene mode is fixed to 5.
Self-timer cannot be set to 2 seconds in Intelligent auto mode.
Self-timer cannot be set to 10 seconds in [SELF PORTRAIT] in scene mode or clipboard mode.
Self-timer cannot be used while in [HI-SPEED BURST] or [UNDERWATER] in scene mode.
Advanced (Recording pictures)
VQT1R99
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents