Basic; Taking Pictures Using The Automatic Function (Ñ: Intelligent Auto Mode) - Panasonic LUMIX DMC-FX37 Operating Instructions Manual

ñ
[REC] mode:

Basic

Taking pictures using the automatic function
( : Intelligent Auto Mode)
ñ
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
•
The following functions are activated automatically.
–
Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/[QUICK AF]/
[I.EXPOSURE]/Digital Red-eye Correction/Backlight Compensation
•
The status indicator 3 lights when you turn this
unit on 2. (It turns off after about 1 second.)
(1: Shutter button)
1 Slide the [REC]/[PLAYBACK] selector switch to [!].
2
Set the mode dial to [ñ].
3
Hold this unit gently with both hands, keep
your arms still at your side and stand with
your feet slightly apart.
A Flash
B AF assist lamp
4
Press the shutter button halfway to focus.
•
The focus indication 1 (green) lights when the subject
is focused.
•
The AF area 2 is displayed around the subject's face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
•
The focus range is 5 cm (0.17 feet) (Wide)/1 m
(3.28 feet) (Tele) to ¶.
5 Press the shutter button fully (push it in
further), and take the picture.
•
The access indication (P15) lights red when pictures are
being recorded on the built-in memory (or the card).
OFF ON
Basic
25
VQT1R99