Adjusting The Computer Image & Setting Hotel Mode - Sanyo LED-22XR10F Instruction Manual

Adjusting the Computer Image & Setting Hotel Mode
Adjusting the PC image
PICTURE SOUND TIME OPTION
Screen
SELECT MOVE
PICTURE SOUND TIME OPTION
Auto Adjust
Horizontal Pos.
Vertical Pos.
Size
Phase
SELECT MOVE
Setting Hotel Mode
Hotel Mode
Channel Preset Lock
Volume Max
AV Lock
Panel Lock
RF AUTO
Press < OK > to save
Before adjusting the screen, make sure that you select the
correct source (D-SUB).
To adjust the computer image:
1
LOCK CHANNEL
Press MENU. The on-screen menu opens with PICTURE
menu displayed.
2
Press 5
select the Screen item, then press 4
3
Press 6
the level, or press OK to confirm. You can select:
RETURN
MENU
! Auto Adjust — Automatically adjusts the image settings
such as position and phase.
! Horizontal Pos. — Moves the image right or left.
LOCK CHANNEL
! Vertical Pos. — Moves the image up or down.
50
! Size — Adjust the horizontal width of the image on the
50
screen.
50
60
! Phase — Adjusts the focus of stable images.
4
To close the menu, press EXIT button.
RETURN
MENU
Hotel Mode feature enables you to lock CHANNEL menu, set
maximum volume, lock other sources except AV1, lock panel
buttons, etc. which is especially useful at Hotel environment.
To set Hotel Mode
On
1
Press SOURCE button. The Input Source menu opens.
100
Press number buttons: [ 1, 4, 7 ] to access the Hotel Mode
2
Off
screen. Be sure to quickly input the numbers while the
Off
Input Source menu is still visible.
Off
Within the menu, press 6
3
3 or 4
Channel Preset Lock — Turns On to lock the
!
CHANNEL menu, the CHANNEL menu will be grayed
out and can not be accessed. To cancel the lock, set it to
Off.
! Volume Max — Sets the maximum volume (30–100) for
the TV.
! AV Lock — Turns On to fix the input source to AV1,
only AV1 programme can be viewed while all other
sources are blocked. To cancel the lock, set it to Off.
! Panel Lock — Turns On to lock panel buttons, buttons
on the control panel on the TV are not active. To restore,
set it to Off.
! RF AUTO — When On is set, the TV will automatically
go to standby if without RF signal input for several
minutes. If Off is set, the TV will still work even if there is
no RF signal input.
Press OK to save the setting. Press EXIT to exit the menu
4
screen directly.
or 6
repeatedly to scroll the menu page until you
or 5 to highlight an option, press 3
or 5 to highlight an option, press
to adjust the option. You can select:
or OK to access.
or 4 to adjust
31