American Standard Champion 4 Elongated Right Height One-Piece Toilet 2034.014 Specification Sheet

CHAMPION 4 ELONGATED RIGHT HEIGHT™
®
ONE-PIECE TOILET
❑ 2034.014
• Vitreous china
• EverClean surface inhibits the growth of
®
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelorator™
flush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Chrome trip lever
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
Nominal Dimensions:
756 x 451 x 749mm
(29-3/4" x 17-3/4" x 29-1/2")
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures-
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specified:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Trip Lever 738772-XXX0A:
❏ 002 Chrome (supplied)
❏ 068 Blackened Bronze
❏ 099 Polished Brass
❏ 295 Satin Nickel
❏ Seat:
❏ Champion Slow Close Elongated #5325.010
®
❏ EverClean Elongated Seat, with Cover and
®
Slow Close Snap-Off Hinges #5321.110
❏ Supply with Stop (by other):
MEETS THE AMERICANS WITH DISABILITIES ACT
GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR
ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK
LOCAL CODES.
•
When installed, top of seat meets minimum requirement
of 432 to 483mm (17" to 19") from the finished floor.
© 2008 AS America Inc.
CHAMPION
RIGHT HEIGHT™ ONE-PIECE TOILET
FINISHED WALL
44mm (1-3/4)
C/L OF SEAT
203mm
POST HOLES
(8)
140mm (5-1/2)
CENTERS
25mm
(1)
95mm
(3-3/4)
32mm
13mm
(1-1/4)
(1/2)
273mm 343mm
(10-3/4) (13-1/2)
305mm
C/L OF OUTLET
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
K8
4 ELONGATED
®
VITREOUS CHINA
756mm
(29-3/4)
470mm
(18-1/2)
SUPPLY
AS
REQ'D
419mm
(16-1/2)
178mm
*
114mm
(4-1/2)
425mm
(16-3/4)
451mm
(17-3/4)
749mm
(29-1/2)
(7)
FINISHED
FLOOR
273mm
(10-3/4)
Revised 2/08