Note
This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, TV
modes.
Multi Control
Available Modes
•
PC / BNC / DVI
•
AV
•
HDMI
•
Component
Multi Control
Assigns an individual ID to the SET.
MENU →
•
ID Setup
Assigns distinctive IDs to the SET.
•
ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
Adjusting the LCD Display
→ → →
→ ENTER → [Multi Control ] → ENTER →
→ [0~9]
,