Specifications - Panasonic NV-SJ3MK2AM Operating Instructions Manual

Specifications

Power Source:
Power Consumption:
Video Recording System:
Video Heads:
Tape Speed:
Tape Format:
Record/Playback Time:
FF/REW Time:
VIDEO
Television System:
Modulation System:
Input Level:
Output Level:
AUDIO
Input Level:
Output Level:
Video Horizontal Resolution:
Signal-to-Noise Ratio:
Audio Frequency Response:
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Standard Accessories:
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
110–240 V AC 50/60 Hz
9 W
2 rotary heads, helical scanning system
2 heads
PAL; 23.39 mm/s (SP), 11.7 mm/s (LP), 7.8 mm/s (EP)
NTSC; 33.3 mm/s (SP),
VHS tape
SP; 240 min with NV-E240
LP; 480 min with NV-E240
EP; 720 min with NV-E240
Approx. 60 s with NV-E180
CCIR; 625 lines, 50 fields, PAL colour signal
EIA; Standard (525 lines, 60 fields), NTSC colour signal
Luminance; FM azimuth recording
Colour signal; converted subcarrier phase shift recording
VIDEO IN (PHONO);
VIDEO OUT (PHONO); 1.0 Vp-p,
RF modulated;
AUDIO IN (PHONO);
AUDIO OUT (PHONO);
Colour; more than 240 lines (SP)
Video; more than 43 dB (SP)
Audio; more than 43 dB (SP)
80 Hz–8 kHz(SP)
5 oC–40 oC
35 %–80 %
2.8 kg
320 (W)k86.5 (H)k274.5 (D) mm
1 pc. Coaxial Cable
1 pc. Remote Control
2 pcs. R6 size batteries
Note to electrical appliance dealers only
To Demonstrate Drive Indicator
1 Eject a cassette tape, if it has been inserted.
2 Turn on the VCR (Line Recording).
3 Keep [EJECT] pressed for 3 seconds or more.
4 Press [STOP] to cancel Demonstration mode.
11.1 mm/s (EP)
1.0 Vp-p, 75 ohm, terminated
75 ohm, terminated
VHF E3 or 4,
j6 dBV, more than 47 kohm
j6 dBV, less than 1 kohm
75 ohm
120
REC/ LP(EP)
STANDBY
15