Table of Contents
Advertisement
1 Setting up the system
System position
Please take note of the following criteria for creating a practical and safe workplace when setting up
your computer:
The system can be used anywhere the temperature is suitable for people. However, rooms with
humidity over 70%, and dusty or dirty areas are not appropriate. In addition, do not expose the system
to any temperatures over +35° C or under +10° C.
Make sure that the cables connecting the system to peripheral devices are not tight.
Make sure that all power and connection cables are positioned so that they are not trip hazards.
When you save data to your system's hard disks or to a floppy disk, they are stored as magnetic
information on the media. Make sure that they are not damaged by magnetic or electromagnetic
fields.
Because the electronics in your computer can be damaged by jarring, no mechanical devices
should be placed on the same surface as the system. This is especially important for impact
printers whose vibrations could damage the hard disk.
ATTENTION
In order to fully separate the system from current, the power cord must be removed from the wall
outlet
MAXDATA PLATINUM 510 Server
7
Advertisement
Table of Contents
