Siemens HB 480 Series Instruction Manual page 29

Glass cover for the oven
light
Notes
Cleaning the plating rack
q Spray on the cleaner and allow it to take effect.
NB: Only spray on the oven floor and the side
walls.
In the case of remains that are difficult to remove,
heat the oven up to 50 ºC for a maximum of
2 minutes no longer, otherwise the enamel will
become stained.
q Wipe the oven down thoroughly.
It is best to clean the glass cover in the oven with
soapy water.
The oven is enamelled. Enamel has to be burnt on at
very high temperatures. This can cause some slight
colour variation.
The edges of thin trays can be rough as they cannot
be completely enamelled. The anti corrosion
protection is guaranteed.
Unhook the racks and clean them using a detergent
solution and sponge or nylon cleaning sponge for
stubborn dirt. Reinstall the racks once they have been
cleaned.
29