Malfunction
No radio connec-
tion to the base
/
station:
flashing!
Range
The range is up to 50 m indoors and approx. 300 m out-
doors. The base station symbol
is exceeded.
Customer Care
You can get assistance easily when you have technical ques-
tions or questions about how to use your device by using
our online support service on the Internet at:
www.my-siemens.com/customercare
or by referring to the section entitled Questions and
answers in this manual (page 13).
If the device needs to be repaired, please contact one of our
Customer Care Centers:
Abu Dhabi.....................................................................0 26 42 38 00
Argentina .................................................................0 80 08 88 98 78
Australia......................................................................18 00 62 24 14
Austria ........................................................................05 17 07 50 04
Bahrain .................................................................................40 42 34
Bangladesh...................................................................0 17 52 74 47
Belgium ........................................................................0 78 15 22 21
Bosnia Herzegovina......................................................0 33 27 66 49
Brazil........................................................................0 80 07 07 12 48
Brunei ..............................................................................02 43 08 01
Bulgaria............................................................................02 73 94 88
Possible causes
The handset is
outside the base
icon
station range.
The handset is
not registered.
The base station
is not active.
/
flashes when the range
14
Solution
Move closer to
the base station.
Register the
handset (see
page 12).
Insert round plug
of the mains
cable into jack
and lay the cable
in cable channel
(to prevent over-
tensioning).
Plug the power
supply unit into
the power socket.