Volume Correction; Audio Description - Panasonic Viera TX-L32G10B Operating Instructions Manual

Menu Item
Mode
Bass
Treble
Balance
Headphone Volume
Surround

Volume Correction

Speaker Distance to
Wall
Preferred Multi Audio
NICAM
HDMI1 / 4 Input

Audio Description

Volume
Speakers
Headphones
Reset to Defaults
●
A different menu will be displayed while PC or SD Card is used. (p. 55 - 57)
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Select two different sound settings (Music / Speech)
In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your
particular sound requirement
●
Changes to any settings in a mode will affect all signal sources
●
Sound quality can be improved
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
●
Switching is also possible by the Surround button on the remote control (p. 9).
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●
If the back space between the TV and wall is over 30 cm, "Over 30cm" is
recommended.
●
If the back space between the TV and wall is within 30 cm, "Up to 30cm" is
recommended.
Selects the preferred language for digital channel multi audio (depending on the
broadcaster)
NICAM (Near Instantaneous Companded Audio Multiplex)
A format for digital sound over television
Reproduces stereo sound (Off / On)
●
Off if reception is poor (FM monaural sound)
●
Analogue mode only
Select to fit the input signal (Digital / Analogue) (p. 70)
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
●
HDMI input mode only
●
HDMI2 / 3 terminals are for digital signal only
●
No setting for HDMI2 / 3 available
Useful for visually-impaired viewers (Off / Auto)
Set to "Auto" to activate the description sound track if available
●
freesat or DVB mode only
●
The availability of audio description sound track is indicated by "AD" in the information
banner (p. 16).
Adjusts the volume for Audio Description
●
DVB mode only
Set to "On" to activate the description sound track from TV speakers (Off / On)
●
DVB mode only
Set to "On" to activate the description sound track from headphones (Off / On)
●
DVB mode only
Press the OK button to reset the present Sound Mode to the default settings
●
Effective to Bass, Treble, Balance, Headphone Volume and Surround
31