Registering A Unit - Panasonic KX-TG6461E Operating Instructions Manual

TG6461E(e).book Page 25 Monday, March 16, 2009 8:50 AM
= Base unit
■ From the caller list:
1
\ (right soft key)
2
{V}/{^}: Select the entry to be barred. i
8
3
{V}/{^}: "Add Bar List" i M
4
{b}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{b}
Y Handset
■ From the caller list:
1
8 (middle soft key)
2
{V}/{^}: "Caller List" i M
3
{V}/{^}: Select the entry to be barred. i
8
4
{V}/{^}: "Add Bar List" i M
5
{ih}
■ By entering phone numbers:
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M i
~
3
Enter the phone number (24 digits max.).
i M
L To erase a digit, press ^.
4
{ih}
Viewing/editing/erasing bar call numbers
= Base unit
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {b}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {b}
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
■ Erasing a number:
W i {V}/{^}: "Yes" i M i {b}
Y Handset
1
8 (middle soft key)
2
{V}/{^}: "Caller Barred" i M
3
{V}/{^}: Select the desired entry.
L To exit, press {ih}.
4
Proceed with the desired operation.
■ Editing a number:
8 i {V}/{^}: "Edit" i M i Edit
the phone number. i M i {ih}
■ Erasing a number:
W i {V}/{^}: "Yes" i M i
{ih}
Note for base unit and handset:
L When editing, press the desired dial key to add,
^ to erase.

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
L The additional handset model recommended for
use with this unit is noted on page 3. If another
handset model is used, certain operations (base
unit settings, handset settings, etc.) may not be
available.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit (for example, w flashes
even when the handset is near the base unit), re-
register the handset.
1
Handset:
8 (middle soft key)
2
{V}/{^}: "Handset Setup" i M
3
{V}/{^}: "Register H.set" i M
Programming
25