Making/Answering Calls; Making Calls - Panasonic KX-TG6461E Operating Instructions Manual

TG6461E(e).book Page 14 Monday, March 16, 2009 8:50 AM

Making/Answering Calls

Making calls

Using the base unit =
1
Dial the phone number.
L To correct a digit, press ^.
2
Lift the corded handset.
3
When you finish talking, place the corded
handset on the cradle.
Note:
L You can also dial the phone number after lifting
the corded handset.
Using the speakerphone
1
During a conversation with the corded
handset, press {s} to turn on the
speakerphone.
L You can place the corded handset on the
cradle.
L Speak into the base unit microphone.
L Speak alternately with the other party.
2
When you finish talking, press {s}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch to the receiver, lift the corded handset.
Using the handset Y
1
Lift the handset and dial the phone number.
L To correct a digit, press ^.
2
{C}
3
When you finish talking, press {ih} or place
the handset on the charger.
Using the speakerphone
1
During a conversation, press {s} to turn on
the speakerphone.
L Speak alternately with the other party.
2
When you finish talking, press {ih}.
Note:
L For best performance, use the speakerphone in
a quiet environment.
L To switch back to the receiver, press {C}.
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Adjusting the receiver or speaker
volume
= Base unit / Y Handset
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored in
the redial list in each unit (each 24 digits max.).
= Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {R}
Handset: j (right soft key)
2
{V}/{^}: Select the desired phone number.
3
Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Erasing a number in the redial list
1
Proceed with the operation for your unit.
Base unit: {R}
Handset: j (right soft key)
2
{V}/{^}: Select the desired phone number.
i 8 i M
3
{V}/{^}: "Yes" i M
4
Proceed with the operation for your unit.
Base unit: {b}
Handset: {ih}
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 18).
= Base unit / Y Handset
Example: If you need to dial the line access
number "0" when making outside calls with a PBX:
1
{0}
2
Proceed with the operation for your unit.
Base unit: {R}
Handset: l
3
Dial the phone number.